A cold air intake is one of the first mods we recommend for the 2.7 EcoBoost. Cold air intake increase airflow which improves turbo efficiency and therefore power. They offer a great all-around balance of performance, power gains, simplicity, and cost. In this guide, I cover the benefits of upgraded intakes and list some F150 2.7 EcoBoost intake options.
2.7L F150 Upgraded Intake Benefits #
The intake system on the 2.7 F150 is completely adequate for stock engines that are running stock boost. However, once you further modify the engine and begin adding more horsepower, the stock intake system becomes restrictive. Running higher levels of boost requires more air flow than the OEM intake can provide.
Therefore, upgrading the intake system becomes extremely beneficial allowing the turbo to breathe and operate more efficiently.
- 5-10whp gains
- 5-10wtq gains
- Quicker turbo spool
- Improved turbo efficiency
- 50%+ improved airflow
- Slight gas mileage improvements
Again, the biggest benefit of an intake comes on modified F150’s. On a stock 2.7 EcoBoost you can probably expect to get somewhere near 2-5whp gains. However, when you combo an intake with a tune, you will see gains closer to 10whp from the cold air intake alone.
2.7 EcoBoost F150 Cold Air Intake Designs #
While we have been referring to upgraded intakes as ‘cold air intakes’ this isn’t necessarily accurate. Technically speaking, cold air intake re-route the location of the air filter usually somewhere inside the lower part of the front bumper. The benefit of this is it draws in air from a point further away from the engine, reducing the temperature of the air it pulls in. This types of intakes are most common on naturally aspirated engines that do not have intercoolers.
On turbocharged vehicles the intake air temps don’t matter as much, especially if you upgrade the 2.7 EcoBoost FMIC. Once the air is sucked in it is sent to the turbocharger where it is heated up anyways. It then enters the intercooler where it is cooled down before entering the combustion chamber. Therefore the temperature of the air when it enters the intake really doesn’t matter since it doesn’t impact the intercoolers ability to cool the air.
With that being said, the term cold air intake is synonymous with performance intake or upgraded intake. The benefit we are chasing is improved airflow, not lower air intake temps. However, one design feature that does matter is open vs. closed intakes.
Open vs. Closed Intakes #
There are two primary styles of upgraded intakes: open and closed intakes. Open intake systems utilize an air filter that is completely open and exposed to the engine bay. Closed intake designs will put the air filter within an enclosed box. The main difference is whether the filter is exposed to engine bay air or not.
Open air systems will provide more airflow since they aren’t restricted by an enclosed box. Closed systems will flow a little bit less air but generally offer slightly lower air intake temps since the filter is protected from hot engine bay air.
With that being said, we prefer open intake systems due to their greater airflow benefits. As we mentioned above, intake air temps really don’t matter so we prefer to opt for more airflow over lower IAT’s.
While we prefer open intakes, it really doesn’t matter unless you are aiming for serious power. Closed intakes are still a huge improvement over the stock system and provide ample airflow for heavily tuned and modified F150’s. The benefits of the increased airflow from open air systems really only comes into play when you are pushing the power limits of the 2.7 EcoBoost or upgrading your turbochargers.
F-150 2.7 EcoBoost Intake Upgrades #
In this section we’ll mention a few of our favorite cold air intake options for the 2.7L F150 EcoBoost. Our recommendations are based on a combination of price, quality, and performance. With that being said, this isn’t an exhaustive list. There are dozens of intake options out there.
So long as the intake system uses a quality air filter the performance benefits won’t vary much from system to system. Choosing to upgrade your intake system is honestly more important than which intake brand you choose. Just stick with a name brand and avoid the ebay junk and you will be fine.
The last important item is fitment. Some 2.7 EcoBoost intakes will fit all 2015+ models whereas some fitment will vary for 2015-2017 models and 2018+ models. Just be cautious of fitment before you order.
1) Boosted Performance Dual Cold Air Intake #
Our in-house brand, Boosted Performance, manufactures a dual filter cold air intake system for 2015-2024 2.7L F150’s. Our dual 8″ air filters are Made in the USA and provide more than 60% airflow increases over the factory airbox.
The open air dual filter design ensures maximum performance and power gains. Furthermore, it comes with all necessary hardware including the vent tube insert for an easy and simple DIY install and no check engine lights, all for $299.
Ultimately, our Boosted Performance intake offers the best combination of price, quality, and performance on the market.
Price: $299
Buy Here: Boosted Performance F150 2.7L Cold Air Intake
2) CVF Dual Filter Cold Air Intake #
CV Fabrication (CVF) offers some awesome bolt-on performance upgrades for Ford EcoBoost engines. Among their products is the F-150 2.7 EcoBoost dual-filter cold air intake system. As the name suggests, this intake kit uses two filters and outflows the stock intake by 65%. The open, dual filter design is sure to deliver excellent power and performance gains. You will also notice a lot more turbo and induction sounds.
As shown above, the intake also includes a 16-gauge heat shield. The filters are 8-layer 3.5″ CVF dry filters. Ultimately, this is an awesome intake from top to bottom. In the BMW world, we’re used to seeing tons of dual filter designs on twin turbo engines. They’re a great option for lightly-modded engines all the way up to extreme 700+whp examples. Point is – the CVF dual filter intake system has a lot of potential regardless of your exact goals.
We’re big fans of CVF products and developed a good relationship with them. As such, we were able to get a 5% coupon code (TUNINGPRO) for our readers. With a final price of $285 this is by far our favorite intake system for the F-150 2.7 EcoBoost.
Price: $299.99 ($285 with code TUNINGPRO)
Buy Here: CVF Dual Filter Cold Air Intake Ford F-150 2.7L
3) Livernois Motorsports Cold Air Intake #
The Livernois Motorsports cold air intake is another great option for the 2.7L F-150 EcoBoost. It’s one of the pricier options around, but Livernois builds some great products here in the United States. Livernois’ intake is also a closed airbox system, so don’t expect quite as much flow or induction/turbo noise as other options. Though, the intake does have totally redesigned intake tube to help promote better air-flow.
Ultimately, the Livernois 2.7 EcoBoost intake delivers great quality at a bit of a premium price. If you’re looking for products built in-house here in the United States then this is a great option. However, if you’re looking for a budget friendly option that also delivers great performance and quality then it’s hard to truly recommend anything over CVF.
Price: $499.99
Buy Here: Livernois F-150 2.7 EcoBoost Intake Upgrade
2.7 EcoBoost Intake Upgrade Summary #
Increasing horsepower or turning up the boost levels on a turbocharger requires increased airflow. The stock intake system on the 2.7L F150 becomes restrictive when modified and tuned which makes upgrading the intake a necessity for those looking to increase power.
Not only does an upgraded intake provide up to 10whp and 10wtq gains, it also improves turbo spool and efficiency, provides a cool sound, and slightly improves gas mileage. We recommend open air systems such as Boosted Performance over closed air systems like Roush due to the increased airflow provided from open systems. But, closed air systems work perfectly fine for those just running normal tunes and modest modifications.
Overall, upgrading the intake on your 2.7L F150 is one of the best mods you can perform. We love the Boosted Performance Intake for its combination of price, design, quality, and performance.
